qiao@hvtest.cc15871365102
  • UHV-2671A Digital Insulation Resistance Tester

    El probador de resistencia de aislamiento digital UHV-2671A se utiliza para verificar la resistencia de aislamiento de equipos eléctricos o cables eléctricos a tierra para garantizar el funcionamiento normal de estos equipos. El equipo tiene una gran potencia de salida, un alto valor de corriente de cortocircuito y múltiples niveles de voltaje de salida.

    Product Details of UHV-2671A Digital Insulation Resistance Tester


    Product Introduction

    The UHV-2671A Digital Megohmmeter, manufactured by Wuhan UHV, is designed using medium- and large-scale integrated circuits. This meter features high output power, a high short-circuit current value, and multiple output voltage levels.

    The operating principle is as follows: the DC high voltage generated by DC/DC conversion from the internal battery serves as the power source. This voltage is applied from the E terminal to the L terminal through the device under test, generating a current flow from E to L. After I/V conversion and division, the measured insulation resistance value is directly displayed on the LCD screen.


    Product Characteristics

    1. Auto Discharge Function: Ensures safer operation by automatically discharging residual voltage.

    2. LCD Backlight: Provides clear visibility in low-light conditions.

    3. Live Wire Warning: Features audible indication to alert users when a live wire is detected.

    4. Auto Power-Off: Automatically powers off after 10 minutes of inactivity to conserve battery life.

    5. Low Battery Indication: Alerts the user when the battery level is low, ensuring timely replacement or recharging.


    Parámetros técnicos

    El voltaje nominal100V250V500V1000V2500V
    Rango de medición

    0.0-10MΩ

    10-100MΩ

    100-200MΩ

    0.0-10MΩ

    10-100MΩ

    100-500MΩ

    0.0-99.9MΩ

    100-999MΩ

    0.0-99.9MΩ

    100-999MΩ

    1.00-19.9GΩ

    0.0-99.9MΩ

    100-999MΩ

    1.00-9.99GΩ

    10.0-49.9GΩ

    El circuito abierto

    Voltaje

    CC 100 V+10 %CC 250 V+10 %CC 500 V +20 %CC 1000 V+20 %CC 2500 V+20 %

    Medición estándar

    actual

    0.5MΩ When the load

    0,2 mA-0,25 mA

    0.5MΩ When the load

    0,5 mA-0,55 mA

    0.5MΩ When the load

    1mA-1,1mA

    1.0MΩ When the load

    1mA-1,1mA

    2.5MΩ When the load

    1mA-1,1mA

    Cortocircuitoaproximadamente 1,3 mA
    precisión±5%rdg±5dgt

    Medición de voltaje


    AC Dar la vuelta
    Rango30-600 V (50/60 Hz)
    Resolución1V
    Exactitud±2% lectura ±3 dígitos

    Especificación técnica

    ParámetroÍndice
    pantalla LCDMáximo 999 cuentas
    Indicación de exceso de rango

    OL:appears on insulation resistance

    LO:appears on voltage

    rango automático

    Cambio de rango al rango superior: 1000 cuentas

    Cambio de rango a rango inferior: 95 cuentas (solo en aislamiento)

    Tasa de muestreo0,5-10 veces/seg
    Operación≤2000m(indoor use)
    El entorno operativoThe temperature:0°C-40°C humidity:≤85%
    Entorno de almacenamientoThe temperature:-20°C-60°C humidity:≤90%
    Protección de sobrecarga

    Insulation resistance range: AC 1200V/10 seconds

    Voltage range: AC 720V/10 seconds

    Tensión soportadaAC 8320V(50/60Hz)/5 seconds (between circuit and periphery)
    Impedancia de aislamiento>1000MQ/DC 1000V(Entre el circuito y la periferia)
    fuente de alimentaciónCC 9 V (6 pilas AA de 1,5 V)
    Bateríaaprox. 800 mA (máx.)
    Duración de la bateríaaprox. 15 horas
    Dimensión125,4x174,6x69mm
    Peso547,44 g (sin batería ni cable de prueba)

    Maintenance

    1.Do not store or use the unit in following circumstance:
    a. Splashes of water or high levels of dust.
    b. Air of high salt or sulphur content.
    c. Air mixed with other gases or chemical contents.
    d. High temperature or humidity (above 60°C, 90%RH,) or direct sunlight.
    2. Do not disassemble the unit or attempt any internal a Iterations.
    3. Never use alcohol or diluents to clean the housing for doing that will especially erode the LCD surface; just clean the unit lightly as needed with little cleanwater.







    También podría gustarte

    • ¡Tiene alguna pregunta!

      NO DUDE EN CONTACTARNOS EN CUALQUIER MOMENTO
      Contáctenos
    • Visítanos

      Edificio 6, Parque Industrial Óptico-Mecánico Optics Valley, 84 Gaoxin 5 Road,
      Zona de desarrollo de nuevas tecnologías de East Lake, ciudad de Wuhan, provincia de Hubei, China

    • Envíanos un correo electrónico

      qiao@hvtest.cc

    • Llámanos

      +86-15871365102